The Message Board for the Philippine Printing Industry (Established 2007)
 
HomePortalFAQSearchRegisterMemberlistUsergroupsLog in

Share | 
 

 survey lang po para maiba naman

View previous topic View next topic Go down 
Go to page : 1, 2  Next
AuthorMessage
Flexoto

avatar

Number of posts : 61
Location : Pampanga
Member since : 2007-06-15

PostSubject: survey lang po para maiba naman   Sun Sep 16, 2007 12:06 pm

I hope this thread falls under this category. I noticed masyado tayong serious para maiba naman let's try this. We don't have an ice breaker category kaya naisip ko ito. I think it is interesting to know (statistically) kung sino-sino sa forum members ang press owners, jobbers, sales reprentatives, managers, suppliers and others. Or perhaps yung iba nag-member kasi interested sila sa printing but not yet in printing business. Come on tell us. Smile

Umpisahan ko na.

Used to be a press employee
but now a press owner Wink
Back to top Go down
View user profile http://www.printers-mart.com
billy

avatar

Number of posts : 179
Age : 49
Location : makati
Member since : 2007-07-24

PostSubject: Re: survey lang po para maiba naman   Mon Sep 17, 2007 1:59 pm

I was a Prepress supervisor from a Colorsep company in Makati, then an application support for gretagmacbeth and a RIP software.

Now, I am an application/work consultant- color management for a digital press and a RIP software evaluator for the LFP.
Back to top Go down
View user profile
ibler



Number of posts : 112
Location : cebu
Member since : 2007-06-05

PostSubject: Re: survey lang po para maiba naman   Tue Sep 18, 2007 1:56 pm

I manage a small printshop. Smile
Back to top Go down
View user profile
keystone



Number of posts : 6
Location : antipolo city and marikina city
Member since : 2007-07-26

PostSubject: Re: survey lang po para maiba naman   Wed Sep 19, 2007 5:57 pm

May-ari po ako ng maliit na imprenta. Very Happy
Kamusta po kayong lahat
Back to top Go down
View user profile
presstech

avatar

Number of posts : 256
Age : 69
Location : Metro Manila
Member since : 2007-05-29

PostSubject: Re: survey lang po para maiba naman   Sun Sep 23, 2007 12:44 am

I used to own a service bureau and a printshop. More than 35 years na sa industry.
I am now into refurbishing and dealership of imagesetter systems. It's less stressful! lol!
Back to top Go down
View user profile
joselito r. fajardo



Number of posts : 1
Age : 46
Location : cebu city
Member since : 2007-10-16

PostSubject: Re: survey lang po para maiba naman   Mon Oct 22, 2007 6:17 pm

more than 2 decades na ako sa printing industry,marami na akong napasukan na printing companies d2 sa pinas at sa abroad,sa ngayon
feeling ko napagiwanan na ako sa pinakalatest tecnology meron bang institution na magprovide ng seminars na free of charge,napakamahal po kasi ng mga fees, and2 kasi kami sa probinsya maliit lang ang budget namin.....thanks
Back to top Go down
View user profile http://yahoo.com
zeleevin



Number of posts : 3
Location : fairview quezon city
Member since : 2007-10-02

PostSubject: Re: survey lang po para maiba naman   Fri Nov 16, 2007 2:20 am

Hi! Ed salavarria po, bago po ako sa printing business and I happened to be one of the co owner. We have acquired a kord 62 Heidelberg machine 4 months ago pero until now wala pa rin profit. Kasi right now Im working in U.A.E. and Im planning to be back coming December'07. Wife ko lang ang nagma manage at yung mga In Laws ko. By the way taga Greenfields I Novaliches Quezon City nga pala ako. Baka naman pwede nyo ko matulungan on how to mange my small printing business? Thanks!


Last edited by on Sat Nov 24, 2007 5:15 pm; edited 1 time in total
Back to top Go down
View user profile
presstech

avatar

Number of posts : 256
Age : 69
Location : Metro Manila
Member since : 2007-05-29

PostSubject: Re: survey lang po para maiba naman   Thu Nov 22, 2007 9:29 pm

Hi Ed!

Let us know when you arrive. We are always ready to share information.
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Thu Nov 22, 2007 11:17 pm

Hi everyone. I'm Larry Sison. For 6 years Ive worked as Prepress Supervisor and also as Quality Assurance Executive for Alyaum Printing Complex, printer of 4 local newspapers and of about 30 monthly magazines.

Our editorial and printing complex are located in Dammam, Saudi Arabia. In 2008, we are scheduled to construct 2 printing facilities in other cities.

In March 2006, Alyaum won Best in Print in Asia (3rd Place) during the Asian Media Awards printing competition. December that same year, our company was awarded the Ifra ISO 12647-3 print quality certificate....the 2nd newspaper printing plant in the world to be certified.

I was project leader on both occasions.

We are now in the process of arranging a PSO (12647-2) certification from Fogra. I'm hoping we get lucky. We will be needing your prayers on this one. Thanks!
Back to top Go down
View user profile
zeleevin



Number of posts : 3
Location : fairview quezon city
Member since : 2007-10-02

PostSubject: Re: survey lang po para maiba naman   Sat Nov 24, 2007 5:22 pm

presstech wrote:
Hi Ed!

Let us know when you arrive. We are always ready to share information.


Thank you very much sir presstech. sorry ngayon lang ako naka reply. nasa offshore kasi ako past few days. medy kkonti lang ang means ng communication. anyway thank you in advanvce that would be very helpful and i appreciate your concern
Back to top Go down
View user profile
zeleevin



Number of posts : 3
Location : fairview quezon city
Member since : 2007-10-02

PostSubject: Re: survey lang po para maiba naman   Sat Nov 24, 2007 5:24 pm

zeleevin wrote:
presstech wrote:
Hi Ed!

Let us know when you arrive. We are always ready to share information.


Thank you very much sir presstech. sorry ngayon lang ako naka reply. nasa offshore kasi ako past few days. medyo konti lang ang means ng communication. anyway thank you in advanvce that would be very helpful and i appreciate your concern
Back to top Go down
View user profile
f2sangreo

avatar

Number of posts : 20
Age : 46
Location : 79 Molave St., corner Kamagong St., Duyan-Duyan, Proj. 3, QC.
Member since : 2007-11-24

PostSubject: NEWBIE IN PREPRESS TECHNOLOGY   Wed Jan 09, 2008 12:35 pm

Hello everybody, I'm Franc Sangreo, a newbie in prepress technology. A layout artist turned 'prepress operator' who's learning everything on the job!
Back to top Go down
View user profile http://francosangreo.multiply.com/
presstech

avatar

Number of posts : 256
Age : 69
Location : Metro Manila
Member since : 2007-05-29

PostSubject: Re: survey lang po para maiba naman   Wed Jan 09, 2008 2:49 pm

f2sangreo wrote:
Hello everybody, I'm Franc Sangreo, a newbie in prepress technology. A layout artist turned 'prepress operator' who's learning everything on the job!

Welcome to the group, Franc. We are all here to share knowledge and experiences. sunny
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Sun Feb 10, 2008 12:12 am

Hi Franc.

Welcome to the group! Dati din akong Layout Artist before I became Prepress. Medyo hindi madali ang migration ko from the creative field to the technical. But I was lucky to have unselfish people (Boy Kitane and Caloy Gaston) to guide me through the journey.

Feel free to ask questions. I'm sure a lot of them will be answered by many of our experienced friends here.

Btw, we accept Visa and Mastercard.....jok! jok! jok!

Kind regards.

Larry
Back to top Go down
View user profile
SuperTrooper

avatar

Number of posts : 16
Location : Pasig
Member since : 2008-03-31

PostSubject: Re: survey lang po para maiba naman   Tue Apr 01, 2008 1:11 am

i used to be a programmer then took up a prepress job in July 2007, consider myself a novice in this line of work. may need a lot of assistance and advice from people in this forum
Back to top Go down
View user profile
presstech

avatar

Number of posts : 256
Age : 69
Location : Metro Manila
Member since : 2007-05-29

PostSubject: Re: survey lang po para maiba naman   Tue Apr 01, 2008 9:24 pm

SuperTrooper wrote:
i used to be a programmer then took up a prepress job in July 2007, consider myself a novice in this line of work. may need a lot of assistance and advice from people in this forum

Welcome to the group Super Trooper.

What area of prepress are you involved in? Technical or creative? sunny
Back to top Go down
View user profile
SuperTrooper

avatar

Number of posts : 16
Location : Pasig
Member since : 2008-03-31

PostSubject: Re: survey lang po para maiba naman   Fri Apr 11, 2008 11:52 pm

thank you for welcoming me. i'm just a prepress operator assistant. katulong po ng imagesetter operator. katulong po ng wetproof operator. takot ko lang baka maging katulong na po sa bahay soon (he he he... biro lang...)

since dating programmer daw po ako, mas technically capable daw ako (daw!) kaya i was given the task to conduct research on technical areas of improvement for our prepress department. touch ako dyan, pero kung pumalpak ako, ouch naman ako dyan... hahahaha!
Back to top Go down
View user profile
frgman59



Number of posts : 3
Location : Paranaque City
Member since : 2008-05-11

PostSubject: Re: survey lang po para maiba naman   Sun May 11, 2008 7:18 pm

Hello,

I'm Fred, I was an OFW then. I was able to re-enter the local job market in the mid 90's. While working, I also learn and run a screen printing shop to support our corporate giveaways business. Due to the financial difficulties of the company I worked for, I decided to leave my work just recently. I'm interested to start an offset printing business since I encounter paper printing requirements from our existing costumers. Im hoping that this forum can help me learn the trade.

Maraming salamat,


Fred M.
Back to top Go down
View user profile
charoth



Number of posts : 12
Location : rizal
Member since : 2008-06-26

PostSubject: Re: survey lang po para maiba naman   Fri Jun 27, 2008 5:59 pm

Hi EVeryone,

Charoth here. Im currently working as a sales executive. 7 years. Now I've decided to have my own printing business. I am really excited coz for the first time in 7 years, I will be representing my own co.
Back to top Go down
View user profile
blanketman



Number of posts : 14
Location : Cebu
Member since : 2007-09-19

PostSubject: Re: survey lang po para maiba naman   Thu Sep 04, 2008 10:26 am

Blanketman here,

I have worked in the industry for 35+ years although it feels alot longer. Working mostly in the offset and gravure field in packaging. At present I work as technical applications manager for a European blanket manufacturer. I cover the Asia Pacific region including the Philippines where I am based. The job enables me to see many companies from multinationals in china with 30 plus machines to little one color presses in Indonesia.
Any advice I can give I will do so willingly. ALthough travelling does not allow me access to this site on a regular basis.
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Tue Sep 09, 2008 11:31 pm

Great to have you with us, blanketman! Btw, what brand are you handling?
Back to top Go down
View user profile
blanketman



Number of posts : 14
Location : Cebu
Member since : 2007-09-19

PostSubject: Re: survey lang po para maiba naman   Sat Sep 20, 2008 2:27 pm

I do not want to use this site as a sales tool. All I will tell you is the blanekts are manufactured in German you can work it out from there.
Back to top Go down
View user profile
theovercomer



Number of posts : 12
Location : manila
Member since : 2007-07-06

PostSubject: Re: survey lang po para maiba naman   Mon Sep 22, 2008 11:29 pm

Hello Guys!

I'm supervising a printing press in Sampaloc Manila.


How are you guys?
Back to top Go down
View user profile
jedmaster



Number of posts : 21
Location : Bulacan
Member since : 2007-12-03

PostSubject: Re: survey lang po para maiba naman   Tue Dec 16, 2008 9:21 am

hello guys!

ngaun ko lang nakita thread na to.. Razz

anyways, jedmaster here.. I handle the lay-outing and general supervision in our small printing press here in Bulacan..

..let's keep this site alive! Very Happy

Good day!

Jed V.
Back to top Go down
View user profile
ea



Number of posts : 48
Age : 60
Location : quezon city
Member since : 2008-12-12

PostSubject: Re: survey lang po para maiba naman   Sun Dec 28, 2008 10:28 pm

Hi guys! Happy holidays to all! This is EA Pagdato, Free-lance printing technician from Heidelberg Phils, Inc. formerly EAC (Phils). If you have problems on your machines (Heidelberg, Polar, Stahl, Muller, etc) just contact me. Globe #0915-9896743, Smart #0928-3951468. Thank you! cheers
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Sun Dec 28, 2008 11:19 pm

Hi ea. Welcome to the site! Just wanted to ask if you've worked in Dubai and Saudi Arabia. Happy holidays to you and to your family!

Larry Sison
Alyaum, Dammam
Back to top Go down
View user profile
Alex Dulay



Number of posts : 108
Location : Manila
Member since : 2008-12-30

PostSubject: Re: survey lang po para maiba naman   Sat Jan 03, 2009 7:10 pm

Ey, Sir Larry! Sikat na sikat ka na ah, hehehe. Musta, master.
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Sat Jan 03, 2009 9:51 pm

Hi Sir Alex Dulay. Musta na mentor? Salamat sa mga itinuro mo sa akin noon. Ayaw mo akong turuan kapag di ako nagbabasa ng libro. hehehe. Pero tama ang ginawa mo sa akin kasi madami akong natutunan sa training mo. Miss ko na ang mga technical discussions natin. My email is larry_sison@yahoo.com
Back to top Go down
View user profile
ea



Number of posts : 48
Age : 60
Location : quezon city
Member since : 2008-12-12

PostSubject: Re: survey lang po para maiba naman   Wed Jan 07, 2009 12:42 am

[quote="larrysison"]Hi ea. Welcome to the site! Just wanted to ask if you've worked in Dubai and Saudi Arabia. Happy holidays to you and to your family!


Yes, i was in Riyadh from Sept. 2, 2002 to April 12, 2005 at Al Nasher Al Arabi
Printing Press. Then Dubai (Sharjah) from June 22, 2006 to June 30, 2007. July 3 went home. I work for Adel El Aidy Trdg. I was assigned in Riyadh from
Dec 3, 2006 to May 1, 2007 to install our machines at Smart Image. Then we meet in your accommodation when we visited pare Ruel in Dammam. Kaya bale second time ko sa Riyadh as a visitor.

I just read pareng Dennis email, nandito na raw xa sa pinas!

Best regards!

ka ea
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Thu Jan 08, 2009 5:13 pm

Hi Ka ea. Salamat naman naka-uwi na rin si Pareng Dennis. Yan ang mahirap sa Saudi, unpredictable ang utak ng mga boss. If they decide not to let you go kahit na nagresign ka na pwede nilang gawin.

Hope everyone's fine and safe back home.
Back to top Go down
View user profile
Kofi Baracko



Number of posts : 20
Location : Manila
Member since : 2009-02-03

PostSubject: Re: survey lang po para maiba naman   Tue Feb 03, 2009 6:04 pm

Magandang araw po. Si Kofi Baracko po ang inyong lingkod, mahilig sa kape at tagahanga ni Obama.

I had been in the printing industry for many years, sent my kids to school as a printing owner and manager, now I am semi-retired. The industry had been good to me, so I will try to be as active as I can in this forum.

Congratulations to those who have made this forum possible.
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Wed Feb 04, 2009 3:42 am

Hi Sir Kofi. Welcome po sa forum. I'm sure madami po kayong maco-contribute dito sa site natin.
Back to top Go down
View user profile
Kofi Baracko



Number of posts : 20
Location : Manila
Member since : 2009-02-03

PostSubject: Re: survey lang po para maiba naman   Wed Feb 04, 2009 9:45 am

Hi Larry, salamat. I have a suggestion for our OFWs in the Middle East who want to come back to the Philippines to start a printing press business.

My suggestion is that they try to pool their resources together -- expertise and money -- to set up their own printing company in the Philippines.

I started out with nothing when I set up my own printing company, but that was more 20 years ago and the stituation then was different from what it is now. But telling the story of my business is not the objective of this post so allow me to reserve it for later.

If you're into prepress, then by all means study the market and set up your own CTF or CTP company. This will cost a tidy sum and I do not wish to suggest that you put all your hard earned money into one basket. So get a business partner and an accountant that you can trust.

In the same light, if you're a printing press operator, you can consider setting up a press running service. This involves large capitalization, so if you can have a business partner in this venture -- by all means do it.

Similarly, if you're into bindery, then you can do the same.

What is important is you keep your costs down so you can price your service competitively, maintain good quality, deliver quickly, and collect even more quickly.

By the way, P300,000 is definitely not enough for a newbie in the printing business. However, P300000 plus your experience and expertise might go a long, depending on your imagination and network in the industry.
Back to top Go down
View user profile
ea



Number of posts : 48
Age : 60
Location : quezon city
Member since : 2008-12-12

PostSubject: Re: survey lang po para maiba naman   Sat Feb 07, 2009 7:51 pm

Hello Kofi Baracko, Thanks for your suggestion pero hindi ganoon kadali yon. That idea is already discussed since December 2002 in Riyadh, KSA. And i am trying to revive that idea again to talk to any workers in the graphics art industry to support that idea.

Welcome to the forum!

ka ea
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Sun Feb 08, 2009 5:05 am

With the extensive effects of the global financial crisis many publishing companies in the U.S., and elsewhere, are set to outsource their creative & technical prepress services to either India or the Philippines.

With clients offshore I guess this is a good opportunity for business owners to pool their resources and setup a graphics and prepress outfit.

My thoughts only.
Back to top Go down
View user profile
Kofi Baracko



Number of posts : 20
Location : Manila
Member since : 2009-02-03

PostSubject: Re: survey lang po para maiba naman   Mon Feb 09, 2009 9:19 am

Quote :
Hello Kofi Baracko, Thanks for your suggestion pero hindi ganoon kadali yon. That idea is already discussed since December 2002 in Riyadh, KSA. And i am trying to revive that idea again to talk to any workers in the graphics art industry to support that idea.[quote]


Hi Ka Ea,

I agree with you. This is really is big challenge. Filipino printers are known for their "individualism," with everyone wanting to have a full-service printing press. This should not be the case. We should learn to specialize. More importantly, we should learn to cooperate.
Back to top Go down
View user profile
Luigi

avatar

Number of posts : 10
Location : Quezon City
Member since : 2007-06-06

PostSubject: Re: survey lang po para maiba naman   Fri Feb 13, 2009 11:29 am

Luigi Abiva 3rd generation family corporation
Back to top Go down
View user profile
Kofi Baracko



Number of posts : 20
Location : Manila
Member since : 2009-02-03

PostSubject: Re: survey lang po para maiba naman   Wed Feb 25, 2009 2:16 pm

Hi Luigi. It's good to have the son of the master in this forum. I heard you're doing quite well yourself. Congrats. Are you still with the PPTF? Can you give us updates -- seminar schedule and activities?
Back to top Go down
View user profile
vincentheat16



Number of posts : 57
Location : mandaluyong
Member since : 2009-02-19

PostSubject: Re: survey lang po para maiba naman   Fri Feb 27, 2009 2:04 pm

hello guys, Im a system consultant of an exclusive distributor of digital printing equipments and also finishing products, maybe some of you know my company( AKINTO MARKETING CORP.) anyways im here to have a dept knowledge in printing industries cause hindi ako ganun kaalam in terms of mga printing business cycle, i want to have a business of my own someday yun ako na din ang owner like some other successful member here. hope you could guide me. By the way if you have or into starting a business in printing, my company does have a great program to help out those who would like to have thier own machine for printing such as duplicators(riso). It is called the FREE USE PROMO, i could discuss the details if you want to inquire bout it, just give me a call 09236578100 or leave a message to my secretary at 723-7120 im happy to help out too. also yung may mga existing riso machine na sirain at masakit na sa ulo ang maintenance cost, mahal na consumables and low tech quality, we welcome trade in at a reasonable cost. Dun nga pla sa Promo na free use 3 yrs zero maintenance ang printers, to a vail you have to give a refundable deposit and buy an initial set of consumbles para sa unit na ipapahiram namin this is specially made para sa mga printers kesa mag invest ng mahal eh pahiramin na lng ng company namin ng duplicating machine (riso). Sa mga printers na wala pa nito its an oppurtunity to have one at a very low investment cost. Makatulong ito sa pagprint natin ng mga meduim volume run yung hindi na kailangan na ioffset pa, mas makasave kayo and still have your quality of printing at i speedy production at a low cost. Some of our valued client are Quiapo Printing, Diamond Printing Press, Abacus Digital Prints, N.U Printing, DGR bookbinding, De Lumen Press, and may more to mention an printers din, they found out that benefit of having one unit our akinto duplicator is worth nothing to lose but more to gain. feek free to contact me if you have inquiry about the mechanics of the FREE USE PROMO. Best wishes to all and God Bless
Back to top Go down
View user profile
dan

avatar

Number of posts : 17
Location : antipolo
Member since : 2009-02-10

PostSubject: Re: survey lang po para maiba naman   Thu Jul 02, 2009 12:31 pm

hi po sa inyong lahat, i am newbie here, before, i am plain offset optr.
but now i am handling people, and i am working in valenzuela as printing coordinator pero ng ooperate prin Laughing, and now ng try ko mag shift sa lay-out & graphic design co'z i want to start a small printing biz. but for now i am currently employed at same time jobber, di po ko tumitigil, printing is a long journey of schooling, and i know that this forum will help me to do all of that thank and god bless us all!!! more power!!!


Last edited by dan rosales on Thu Jul 09, 2009 11:26 am; edited 1 time in total
Back to top Go down
View user profile
ytet



Number of posts : 5
Location : Laguna
Member since : 2009-06-30

PostSubject: Re: survey lang po para maiba naman   Thu Jul 02, 2009 3:34 pm

Hi everyone. Also a newbie in this forum. Very thankful that I found this site. I'm planning to put up a desk top publishing and I like to know more about the social printing aspects like making invites and many more. My present business is selling craft materials and souvenirs. I was thinking of incorporating the invites making into my business. I know I will gain a lot in this forum regarding this business.

Regards to everyone.
Back to top Go down
View user profile
mscloee

avatar

Number of posts : 4
Age : 32
Location : caloocan
Member since : 2009-09-06

PostSubject: Re: survey lang po para maiba naman   Sun Sep 06, 2009 5:14 pm

hi guys bago lang as in bago lang tlaga ako Smile i want to start a printing business at nagsearch sa google that is why i found this forum hopemay makatulong sakin.

thanks
Back to top Go down
View user profile http://pinoychat25.com/amypretty
JhunRuby



Number of posts : 9
Age : 43
Location : Mandaluyong
Member since : 2009-09-08

PostSubject: Re: survey lang po para maiba naman   Tue Oct 20, 2009 5:31 pm

I'm Pre-press Supervisor for almost 8 years here in Mandaluyong, working in one of the printer of Summit Media.
Back to top Go down
View user profile
Sandman

avatar

Number of posts : 404
Location : Middle East
Member since : 2007-11-21

PostSubject: Re: survey lang po para maiba naman   Tue Oct 20, 2009 6:03 pm

Welcome to our forum, JhunRuby!
Back to top Go down
View user profile
ar-khay



Number of posts : 10
Location : quezon city
Member since : 2010-11-10

PostSubject: Re: survey lang po para maiba naman   Fri Nov 12, 2010 9:44 pm

hi po sa lahat! bago lang po printingbus. aurelia lng po ang makina ko 19x25 2 colors, may nbili po akong ryobi 480 kailangan ko po ng ng technician mechanical at electrical bka po may mairecomend po kyo. dto po ako sa north fairview. maraming salamat po sa akinto marketing isa po ako sa naka avail ng free use nyo pro mahina pa po e. kmusta po kyong lahat! GOD bless us all Smile
Back to top Go down
View user profile
presstech

avatar

Number of posts : 256
Age : 69
Location : Metro Manila
Member since : 2007-05-29

PostSubject: Re: survey lang po para maiba naman   Sun Nov 14, 2010 10:17 am

Welcome to the forum, ar-khay! Mabuhay sa bagong venture mo. sunny
Back to top Go down
View user profile
ar-khay



Number of posts : 10
Location : quezon city
Member since : 2010-11-10

PostSubject: Re: survey lang po para maiba naman   Sun Nov 14, 2010 8:37 pm

maraming salamat po. mabuhay po tyong lahat! cheers
Back to top Go down
View user profile
nap



Number of posts : 4
Location : Dubai, uae
Member since : 2010-11-15

PostSubject: Re: survey lang po para maiba naman   Sun Nov 21, 2010 6:20 pm

HI to all, my full name is Napoleon Guerrero pero Nap lang pwede na, I am working in dubai for 8 yrs na as a Field Engineer. Our company is the Dealer for Esko Artwork and Xrite mostly the former Gretag Macbeth products. We also have machines for automatic ink dispensing and software for ink formulation. We also supply machines for diemakers (folding and corrugated cartons).

I believe that joining forums like this is very informative and will try share my own ideas and experiences within my capacity.
Back to top Go down
View user profile
ea



Number of posts : 48
Age : 60
Location : quezon city
Member since : 2008-12-12

PostSubject: Re: survey lang po para maiba naman   Sun Nov 21, 2010 8:26 pm

Welcome to the forum, Nap. cheers
Back to top Go down
View user profile
nap



Number of posts : 4
Location : Dubai, uae
Member since : 2010-11-15

PostSubject: Re: survey lang po para maiba naman   Tue Nov 23, 2010 1:27 pm

Thanks ae, parang naka punta na ko sa Adel El Aidy Trdg sa Sharja maybe 3 yrs back to check a processor/heights for violet CTP, High Waters ba yon?
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: survey lang po para maiba naman   

Back to top Go down
 
survey lang po para maiba naman
View previous topic View next topic Back to top 
Page 1 of 2Go to page : 1, 2  Next
 Similar topics
-
» .: CSE Survey for a Project :.
» MTI Business Outlook Survey on Jan 1
» Ruchiranani (CSE) eka para ma maranna
» British Antarctic Survey abandons polar base as worrying crack grows in ice
» Sri Lanka Newspapers - 29/12/2011

Permissions in this forum:You cannot reply to topics in this forum
Filipino Printers Forum :: General Category :: General Discussions-
Jump to: